Table of Contents
Advertisement
2.2.5 Frame Store and Audio Control
FS – Frame Store Button
The HS-2850 has eight or twelve video channels, depending on the number of
inputs it has. Each of these channels has its own Frame Store, making a total of
eight or twelve Frame Stores. Each of these Frame Stores can hold one still
image. This still image can be called into the production by using the FS button located at
the top left corner of the HS-2850 Control Panel / Keyboard. The FS button allows the user
to toggle between the still image of the Frame Store or the live video input also connected
to that same video channel.
How to choose live video input or Frame Store
1. First press and hold down the FS button. The Preset row of input sources will light.
2. While still holding down the FS button, press the required input on the Preset row.
3. The input button will flash to confirm the Frame Store is selected.
This selection will also be confirmed on the HDMI Multi-view, with the selected channel
showing the live input or frame store image.
The content of each Frame Store is uploaded to the HS-2850 from a PC. The supplied
SEConfig software is used to do this. The file upload process is described in Chapter 3.
AUX Source Selection
The auxiliary output (AUX) allows you to fix the SDI output onto a particular
input source. The HS-2850 has four user defined SDI outputs, see Section 2.1.1
item 14. One or all of these outputs can be set up as an auxiliary (AUX) output
via a menu option. See OSD MENU Options onwards for details.
The AUX output source can be quickly selected in the following way.
1. First press and hold down the AUX button. The Input 1 and 2 buttons of the Program
row will light up red.
2. While still holding down the AUX button, press either the Input 1 button or the Input
2 button on the Program row.
3. The pressed input button (1 or 2) on the Program row will now flash red along with
one of the input buttons on the Preset row flashing green. The rest of the input
buttons on the Preset row will remain solid green.
4. The green flashing button on the Preset row indicates the selected source of the AUX
output. To change the source, simply press other input buttons.
When you see the selected input button flashing green, your AUX output source is now
assigned and you may release the AUX button to complete the AUX source selection.
2.2.6 Crosspoint
The CROSSPOINT function allows you to cross assign input channels to program/preset row
buttons. Follow the steps outlined below to assign video input channels to the
program/preset row buttons according to your preference.
20
Advertisement
Table of Contents
