Table of Contents
Advertisement
Configuration Tool
In the previous sections, once you are successfully connected to the TC-100
via Ethernet port, you will be taken directly to the Video tab and on the page
that opens, you will be able to view your video settings and select color
mode for HDMI video input and outputs.
Logo and Overlay tabs allow you to set the logo and subtitles to be placed on
the input video respectively. Note that you are allowed to enable title and
logo overlay simultaneously. See
DIP Switch Control
section to manually
enable these modes.
Video
Click Video tab to view the video settings as shown below.
Click the color mode pull-down menu to set the color mode. The three color
mode options for HDMI video input and outputs are listed as follows:
9
Advertisement
Table of Contents
