Menu Operation Method - Panasonic POVCAM AG-MDR25P Operating Instructions Manual

Menu operation method

Camera Text Menu
operation
Selecting the unit to be
operated
Displaying the Top Menu
Selecting the items
Displaying the sub-menus Press the [F1] dial.
Returning to the previous
menu
Changing the settings
Exiting the menu
operations
≥ The Camera Text Menu is not displayed when [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)].
≥ Perform the menu operations and exit from the menus using the controller which displayed the Top Menu.
If a menu operation has been performed or a menu has been exited using another controller, first display the Top
Menu and exit from it using one controller, and then display the Top Menu and exit from it using the other controller.
≥ The unit uses a different method to operate its menus from the one employed by the convertible cameras and HD
integrated cameras which have already been launched onto the market. For details, refer to the Operating
Instructions of the camera concerned.
≥ The response speed of the camera differs slightly depending on the controller used.
AW-RP50
Press one of the [CAMERA STATUS/
SELECTION] buttons.
Press the [CAMERA OSD] button for
about 2 seconds.
≥ The Camera Text Menu of this unit is displayed in the IP image.
* The Camera Text Menu is not output from the HDMI OUT terminal/SDI OUT
terminal of this unit.
Turn the [F1] dial.
With the cursor at the "Return"
position, press the [F1] dial.
1 Press the [F1] dial to start the
setting blinking.
2 Turn the [F1] dial to change the
setting.
3 Press the [F1] dial to enter the
setting (and stop the blinking).
Press the [CAMERA OSD] button for
about 2 seconds.
Remote camera controller
AW-RP120
1
≥ The camera number in the camera
number display area blinks.
2
≥ Press the lit [UP]/[DOWN] button to
select the camera number.
3
≥ Control of the selected camera is
enabled.
Press and hold the [CHARA/MENU]
button for about 2 seconds.
Turn the [SELECT] dial.
Press the [SELECT] dial.
With the cursor at the "Return"
position, press the [SELECT] dial.
1
2
3
Press and hold the [CHARA/MENU]
button for about 2 seconds.
- 110 -
AK-HRP200
Press and hold the [SELECT]
button for about 2 seconds.
Press the lit [UP]/[DOWN] button.
Press the [SELECT] button.
*
Press the [SELECT] dial to start
the setting blinking.
Turn the [SELECT] dial to
change the setting.
Press the [SELECT] dial to enter
the setting (and stop the
blinking).