Panasonic POVCAM AG-MDR25P Operating Instructions Manual page 150

¥ H.264(1)/H.264(2)
Configure the settings for H.264 images.
H.264 transmission
Whether to transmit the H.264 images is set here.
Factory settings: On
Internet mode (over HTTP)
This setting is selected when transmitting H.264 images over the Internet.
H.264 images can be transmitted using the same broadband router settings as when transmitting JPEG images.
Setting value:
The H.264 images and audio are transmitted using the HTTP port. For details on setting the HTTP port
On
number, refer to page 168.
Off The H.264 images and audio are transmitted using the UDP port.
Factory settings: Off
≥ When [On] is set, only [Unicast port (AUTO)] can be selected as the [Transmission type] setting.
≥ When [On] is set, it takes a few seconds before the H.264 images are displayed.
≥ When this is set to [On], H.264 images may not appear depending on the number of users accessing the unit at the
same time and whether audio data exists.
Image capture size
Select the resolution for H.264 images. Selectable options will vary depending on the selected resolution setting.
Setting value:
3840k2160 (This setting is fixed when the [Priority Mode] is [IP(4K)].)
H.264(1)
1920k1080, 1280k720, 640k360
H.264(2) 1280k720, 640k360
Factory settings:
H.264(1): 1920k1080
H.264(2): 1280k720
Transmission priority
Set the transmission mode for H.264 images.
Setting value:
Transmits H.264 images at the bit rate specified in [Max bit rate (per client)].
Constant bit rate ≥ The [Frame rate] value is automatically determined (as 5fps to 30fps or 5fps to 25fps)
Transmit H.264 images at the frame rate specified in [Frame rate].
Frame rate
≥ Set the frame rate and bit rate and transmit.
Transmit H.264 images at a variable bit rate between the maximum and minimum specified in
[Max bit rate (per client)], according to the network bandwidth.
Best effort
≥ Depending on how the bit rate is changed, the [Frame rate] value is automatically determined
Factory settings: Frame rate
≥ Transmission mode settings are not possible when the [Priority Mode] is set to [IP(4K)].
according to the selected bit rate.
(as 5fps to 30fps or 5fps to 25fps).
- 150 -