Table of Contents
Advertisement
Multi screen setup screen [Multi-screen]
The Camera Heads or the units whose images are to be displayed on the multi screen are set here.
∫ Multi screen setup tab [Multi-screen setup]
This item's setting is reflected when the [Set] button is
pressed.
IP address
Enter the IP address or the host name of the Camera
Head or the unit whose image is to be displayed on the
multi screen.
With one group consisting of 4 cameras, up to four groups
of cameras (a total of 16 cameras) can be registered.
Enter as follows if the HTTP port number has been
changed.
Example of input
http://192.168.0.10:8080
Enter the following when connecting via HTTPS.
Example of input
https://192.168.0.10/
Maximum number
1 to 128 half-size characters
of characters
Factory settings:
Cam. 1 to Cam. 16: blank
≥ When connecting via HTTPS, install the security
certificate for the Camera Head or the unit to be
displayed.
(l
181)
≥ When configuring a host name, the DNS settings of the
personal computer that will display the multi screen
must be configured. For details on the personal
computer's DNS settings, consult your network
administrator.
Camera title
Enter the title of the Camera Head or the unit.
The camera title which has been input is displayed on the multi screen.
≥ You can enter between 0 to 20 half-size characters.
≥ The following characters can be displayed.
Half-size numeric characters
Half-size alphabetical
characters (upper and lower
cases)
Symbols
Factory settings:
Cam. 1 to Cam. 16: blank
≥ When a 16-screen multi screen is selected, camera titles may be only partially displayed.
≥ Multi screen displays are displayed in 4:3 aspect ratio.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
! # $ % ´ ( ) * + , - . / : ; = ? @ [ ] ^ _ ` { | } ˜ ¥
- 164 -
Advertisement
Table of Contents
