Table of Contents
Advertisement
[AUTO REC INPUT]
This unit can start/stop recording automatically following the AUTO REC signal input from the camera recorder
connected to the SDI IN terminal.
[OFF]/[TYPE1]/[TYPE2]/[TYPE3]
[MEDIA SELECT]
Card slot can be selected separately to record motion pictures.
[SD CARD 1]/[SD CARD 2]
[PRE-REC]
Image and audio before pressing the REC/PAUSE button is recorded. AVCHD clips will record from approximately 3
seconds before, and MP4 clips will record from approximately 4 seconds before.
[ON]/[OFF]
[TIME STAMP]
You can stamp the date and time of recording on the images you record.
[ON]/[OFF]
appears on the screen.
≥
≥ The format of the recording date and time varies depending on the settings of [DATE/TIME] and [DATE FORMAT].
(l
225)
≥ The month of the date and time of recording is recorded in English.
≥ In the following cases, even when [TIME STAMP] is set to [ON], the time stamp function cannot be enabled.
j When [DATE/TIME] is set to [OFF]
j During Freeze Frame
≥ The date and time of recording displayed during [TIME STAMP] recording and the date and time displayed during
the playback of the image may not exactly be the same.
[RECORDER ID]
This sets the recorder ID for this unit.
1
Touch [RECORDER ID].
2
Touch
/
to change the Camera Number.
≥ Numbers between 0 and 16 can be set.
3
Touch [RETURN].
≥ Touch [EXIT] to exit the menu screen.
≥ This function's default setting is "0".
(l
82)
(l
70)
(l
41)
- 215 -
(l
71)
Advertisement
Table of Contents
