Event Log - Panasonic POVCAM AG-MDR25P Operating Instructions Manual

Display

Event log

Examples of event logs displayed in the system log tab of the maintenance screen in the web screen are shown below.
(l 185)
Event code
<Power> Recorder system start.
W:0001
<Power> Camera head system start.
W:0002
W:0003 <Power> Recorder power on.
W:0004 <Power> Camera head power on.
W:0005 <Power> Recorder power off.
W:0006 <Power> Camera head power off.
W:0007 <Power> Recorder standby.
W:0008 <Power> Camera head standby.
W:0009 <Power> Camera head cannot be found.
W:0010 <Power> Camera head cannot be used.
<Power> System error. Turn off.
W:0011
<Power> The Camera head and Recorder
W:0012
versions are different.
<Maintenance> Succeeded Recorder
W:1001
firmware update.
<Maintenance> Succeeded Camera head
W:1002
firmware update.
<Maintenance> Reset to default (ALL
W:1003
settings).
<Maintenance> Reset to default (SCENE
W:1004
FILE settings).
<Maintenance> Reset to default (USER
W:1005
FILE settings).
<Maintenance> Reset to default
W:1006
(NETWORK settings).
<Maintenance> Reset to default (except
W:1007
NETWORK settings from WEB).
W:1008 <Maintenance> Reboot.
<Maintenance> Save the USER FILE.
W:1009
Description
- 240 -
Explanation of the content
≥ The system has been started with the Recorder.
(The power supply has started)
≥ The system has been started with the Camera
Head.
(The power supply has started after connecting the
unit and the Camera Head)
≥ The Recorder has been turned on.
≥ The Camera Head has been turned on.
≥ The Recorder has been turned off.
≥ The Camera Head has been turned off.
≥ The Recorder has entered standby mode.
≥ The Camera Head has entered standby mode.
≥ The Camera Head cannot be detected.
≥ The Camera Head cannot be used.
≥ Either the Recorder or both the Recorder and the
Camera Head have been turned off due to a
system error.
≥ The versions of the Camera Head and the
Recorder do not match.
≥ The firmware of the Recorder has been
successfully updated.
≥ The firmware of the Camera Head has been
successfully updated.
≥ The Camera Text Menu or the web screen menu
has been initialized.
≥ The scene file menu has been initialized.
≥ The user file menu has been initialized.
≥ The network setup menu has been initialized.
≥ Menus other than the web screen network setup
menu have been initialized.
≥ The unit has rebooted.
≥ The setting data for [USER FILE] has been saved
successfully.