Panasonic POVCAM AG-MDR25P Operating Instructions Manual page 72

<REC CHECK>
≥ Register <REC CHECK> to a USER button.
Approximately 3 seconds at the last of the clip recorded last can be played back. It will return to the recording screen
once the playback is completed.
≥ The time code is not displayed during REC check.
≥ This does not operate during REC check even if the button is operated.
≥ Recording Check is not possible in following cases:
j When the unit is turned on/off
j When the MODE button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed
j PRE-REC is used
j During Freeze Frame
<LAST CLIP DEL>
≥ Register <LAST CLIP DEL> to a USER button.
The clip recorded last can be deleted.
Deleted clips cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥ It will return to recording screen without deleting by touching [NO].
≥ Deletion is not possible in the following cases.
j When the unit is turned on/off
j When the MODE button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed
<REMOTE REC>
≥ Register <REMOTE REC> to a USER button.
This controls recording performed with an external device (recorder, etc.) connected to the unit.
≥ Set [SDI MODE SEL] to [NORMAL].
1 Select the appropriate option in the [OUTPUT SEL] menu.
: [OUTPUT SETUP] # [OUTPUT SEL] # [SDI]
2 Select the [SDI REMOTE REC] menu.
: [OUTPUT SETUP] # [SDI REMOTE REC] # [TYPE3]
3 Select the [SDI REMOTE REC LINK] menu.
: [OUTPUT SETUP] # [SDI REMOTE REC LINK] # [OFF]
4 Press USER button or touch USER button icon in the recording screen.
≥ This will display
≥ To stop recording to the external device, press the applicable USER button or touch the applicable USER button
icon again. This will display
≥ It is not possible to control recording performed with an external device connected to the SDI OUT terminal in the
following cases:
j When [SDI MODE SEL] is set to [THROUGH]
(l 71, 215)
(l 70)
(l 95)
and send a signal to the external device instructing it to start recording.
and send a signal to the external device instructing it to stop recording.
(l 66)
(l 213)
(l 66)
(l 213)
(l 66)
- 72 -