Table of Contents
Advertisement
[PEAKING COLOR]
You can set the peaking color for Focus Assist.
[Red]/[Blue]/[Yellow]/[White]
[PEAKING LEVEL]
You can set the peaking strength for Focus Assist.
≥ This function's default setting is "0".
[WFM]
This enables/disables the Wave Form Monitor function.
[ON]/[OFF]
[WFM TYPE]
This sets the type of Wave Form Monitor.
[WAVE]/[VECTOR]/[WAVE/VECTOR]
[WFM POSITION]
This sets the display positions of Wave Form Monitor.
[TOP/LEFT]/[TOP/RIGHT]/[BOTTOM/LEFT]/[BOTTOM/RIGHT]
[ZEBRA]
Switch between the zebra display and marker display.
*
[ZEBRA 1]/[ZEBRA 2]
* This cannot be set if [ZEBRA DETECT 2] is set to [OFF].
≥ For information on the zebra display, refer to page 73.
[ZEBRA MODE]
This sets the display duration of the zebra display.
[CONTINUE]:
Displays the zebra display until it is switched to another zebra display setting.
[MOMENT]:
Displays the zebra display for approximately 5 seconds.
(l
(l
78)
/[OFF]
52)
(l
52)
(l
78)
(l
78)
(l
224)
- 223 -
Advertisement
Table of Contents
