Table of Contents
Advertisement
Network connection
Use the remote camera controller/
remote operation panel
Up to a hundred units can be operated by IP connection from a Panasonic controller (AW-RP50, AW-RP120 and
AK-HRP200). (The maximum length of the LAN cables is 100 meters (328 ft).)
∫ Controller supported
≥ AW-RP50
: Ver 4.00.00 or later
≥ AW-RP120
: Ver 3.00.00 or later
≥ AK-HRP200 : Ver 6.00-00-0.00 or later
≥ If the version older, an upgrade is required.
For details on upgrading, visit the support page on the following website.
http://pro-av.panasonic.net/
∫ What AW-RP50/AW-RP120 can do
The following functions can be used.
≥ Selection of the camera head to be operated
≥ Menu setup
≥ Zoom operation
≥ Manual recording
j Focus
j Iris (aperture) adjustment
j Gain adjustment
j Shutter speed
≥ White balance (excluding ATW Lock)
≥ Black level (master pedestal) adjustment
≥ Switching between Day mode/Night mode
≥ Setup of color temperature ([COLOR TEMP])
≥ Setup of the optical image stabilization function
≥ Setup of the digital extender ([D.EXTENDER]) function
≥ Assignment of [COLOR TEMP] and [DIGITAL EXTENDER] to the [USER] button
≥ Panning/tilting cannot be performed with the controller.
In addition, preset memories and camera setup files cannot be saved.
≥ If you switch the system frequency by operating the unit, even when the unit reboots, the controller (or similar
peripheral device) may not reboot along with the unit. If this happens, turn off and on the controller.
≥ For the function that can be used with AK-HRP200, refer to page 117.
≥ For details, refer to the operating Instructions of the controller.
- 109 -
Advertisement
Table of Contents
