Table of Contents
Advertisement
∫ Audio tab [Audio]
Configure audio settings.
≥ This item's setting is reflected when the [Set] button is
pressed.
≥ Images and audio are not synchronized. Therefore,
images and audio may be slightly out of sync.
≥ The audio may skip depending on the network
environment.
¥ Audio
Audio Select
The built-in microphone of the Camera Head can be
selected during the CAM Mode.
Audio can be recorded by using the microphone of the SDI
output device or connecting an external microphone/audio device during the SDI Mode.
≥ Content of the setup is the same as the menu [AUDIO SELECT] of this unit.
Setting value:
(CAM Mode) Off, Internal Mic
(SDI Mode) Off, SDI, Line, Mic, Plug-in Power Mic
Factory settings:
(CAM Mode) Internal Mic
(SDI Mode) SDI
Input Volume
Set the volume of the audio from the unit when listening to it on the personal computer.
Setting value: 0 to 23
Factory settings: 12
≥ When [Audio Level] is set to [Auto], [Input Volume] can be set, but the actual input volume does not change. The
adjusted volume will be applied after the [Audio Level] setting is changed to [Manual].
Low Cut
Reduces the level of the bass.
Sets On/Off.
Factory settings: Off
Audio Level
Switches the adjustment method of Audio Level.
Setting value: Auto, Manual
Factory settings: Auto
≥ [Audio Level] cannot be set when [Audio Select] is set to [Off] or [SDI].
Audio ALC
Turn automatic level adjustment for the audio Off/On.
Factory settings: On
≥ In the following cases, [Audio ALC] will be set to [On], and the setup cannot be changed.
j When [Audio Select] is set to [Off] or [SDI]
j When [Audio Level] is set to [Auto]
- 154 -
(l
61)
Advertisement
Table of Contents
