Table of Contents
Advertisement
Remote camera controller [AW-RP120]
A For operating the Camera Text Menus.
[CAMERA OSD]:
When this is pressed for about 2 seconds, the selected camera menu is displayed, overlapping the camera output
image. When it is pressed for about 2 seconds while a menu is displayed, the menu is exited.
[F1]:
Turn [F1] to move the cursor up and down in the Camera Text Menu or to change setting values. Press [F1] to
move to the next level of a menu item or to change a setting value at the lowest level.
B For selecting the cameras to be operated.
∫ Switching between Day and Night mode
1
Press the [MENU] button on the AW-RP120.
≥ The [MENU] button lights.
2
Press the [FUNCTION] menu [23] button.
≥ The button lights, and the [OPTION] menu appears on the LCD panel.
3
Turn the [F1] dial to select "FUNCTION", then press the [F1] dial.
4
Turn the [F1] dial to select "OPTION".
≥ "Off" or "On" appears on the bottom right (F2 area) of the LCD panel.
5
Turn the [F2] dial to select "Off" or "On", then press the [F2] dial.
[Off]:
Infrared Recording Mode Off
[On]:
Infrared Recording Mode On
≥ If you operate the [IRIS] dial in Manual Iris Mode, the iris is adjusted, while if you operate the dial in Auto Iris Mode,
the setup value of [AE LEVEL] is adjusted.
≥ When one of [IRIS MODE]/[GAIN MODE]/[SHUTTER MODE] is set to [AUTO], even if you adjust the iris/gain/
shutter speed, the brightness may not change.
- 115 -
Advertisement
Table of Contents
