Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11SPi-TF User Manual

Super X11SPi-TF User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.

Tools Needed

Phillips
Screwdriver
(1)
AST2500
LEDBMC
COM2
USB8/9(3.0)
SP1
I-SGPIO2
I-SGPIO1
S-SGPIO1
JOH1
JBT1
S-SATA0
I-SATA0
I-SATA1
I-SATA2
I-SATA3
JSD2
I-SATA4
I-SATA5
I-SATA6
I-SATA7
S-SATA1
FANB
JL1 JSD1

Location of Mounting Holes

Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precaution-
ary measures to avoid damaging these components when installing the motherboard
to the chassis.
Phillips Screws
ASpeed
Intel
X557
MH11
MH10
Intel
C622
BT1
USB2/3
M.2 PCI-E 3.0 X4
LE3
LEDPWR
JPME2 FANA
(9)
VGA
USB6/7(3.0)
LAN2 LAN1
CPU
SAN MAC
BAR CODE
MAC CODE
IPMI CODE
FAN4 FAN3 FAN2
C
JF1
30
Standoffs (9)
Only if Needed
COM1
FAN5
IPMI_LAN
USB0/1
JSTBY1
FAN1