Supermicro X11SPi-TF User Manual page 127

9. When the UEFI Shell prompt appears, type fs# to change the device directory path. Go
to the directory that contains the BIOS package you extracted earlier in Step 2. Enter
flash.nsh BIOSname#.### at the prompt to start the BIOS update process.
Note: Do not interrupt this process until the BIOS flashing is complete.
10. The screen above indicates that the BIOS update process has completed. Reboot the
system when you see the screen below.
Appendix D: UEFI BIOS Recovery
127