Motherboard Features - Supermicro X11SPi-TF User Manual

Super X11SPi-TF User's Manual

Motherboard Features

CPU
•
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA3647) processor with up to 28 cores and a
thermal design power (TDP) of up to 205W
Note: The X11SPi-TF motherboard does not support FPGA or Fabric processors.
Memory
•
Up to 256GB of RDIMM, 512GB of LRDIMM, and 1TB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of up
to 2666MHz in eight memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
•
Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel PCH C622
Expansion Slots
•
One (1) PCI-Express 3.0 x4 Slot (in x8) (PCH SLOT1)
•
One (1) PCI-Express 3.0 x8 Slots (CPU SLOT2)
•
Two (2) PCI-Express 3.0 x8/x16 Slots (CPU SLOT3, CPU SLOT4: Supports Auto Switch)
•
One (1) PCI-Express 3.0 x16 Slot (CPU Slot 6)
•
One (1) M.2 PCI-Express 3.0 x4 Slot (Supports M-Key 2280 and 22110)
Network
•
Intel X557 10G PHY
•
Intel Ethernet Controller X722 for 10G BASE-T Ports
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
•
ASpeed AST2500 BMC
Graphics
•
Graphics controller via ASpeed AST2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
14
http://www.supermicro.com/products/