Dimm Installation; Dimm Removal - Supermicro X11SPi-TF User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
pg. 32.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
ASpeed
AST2500
Intel
X557
LEDBMC
COM2
MH11
USB8/9(3.0)
MH10
SP1
I-SGPIO2
I-SGPIO1
S-SGPIO1
JOH1
JBT1
S-SATA0
Intel
C622
I-SATA0
BT1
I-SATA1
I-SATA2
I-SATA3
I-SATA4 JSD2 USB2/3
M.2 PCI-E 3.0 X4
I-SATA5
I-SATA6
I-SATA7
S-SATA1
LE3
FANB JPME2 FANA
JL1 JSD1
Release Tabs
Press both notches
straight down into
the memory slot.
35
Chapter 2: Installation
VGA
COM1
FAN5
USB6/7(3.0)
IPMI_LAN
LAN2 LAN1
USB0/1
CPU
SAN MAC
BAR CODE
MAC CODE
IPMI CODE
JSTBY1
FAN4 FAN3 FAN2 FAN1
LEDPWR C
JF1
Notches