Programming - FAAC S418 Manual

4. PROGRAMMING

DIP SWITCH DS1 SETTINGS FOR OPERATING LOGIC
OPERATING LOGIC
DS 1: SW 1 - SW 2 - SW 3
LOGIC
E (default)
Semiautomatic
A
Automatic
S
Security
EP
Semiautomatic
step by step
AP
Automatic
step by step
SP
Security
step by step
B
Manned Pulsed
C
Manned Constant
For more details on the operating logics please refer to Chapter 11 - Function Logics
SW 1 SW 2 SW 3
OFF OFF OFF
ON ON ON
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
PAUSE
TIME
One command opens, the next one closes. A command
NO
0 - 4
One command opens, waits for the pause time an then
min
One command opens, waits for the pause time and then
0-4
closes automatically. If the closing safety is activated or
another command is given during the pause time it closes.
min
A maintained open command will not hold the gate open
One command opens, the next one closes. During the mo-
NO
vement a command stops the gate
One command opens, waits for the pause time and then
0-4
closes automatically. A command during the pause time
min
One command opens, waits for the pause time and then
0-4
closes automatically. If the closing safety is activated during
pause time the gate closes in 5 s. A command during pau-
min
An open A command opens the gate, an open B com-
NO
Holding open A active opens the gate, holding Open B acti-
NO
17
DESCRIPTION
during opening stops the gate
closes automatically
holds the gate open
se time holds open the gate
mand closes the gate
ve closes the gate