Webasto ProMaster Vancouver Standard Manual page 20

Vancouver
NOTE: This step applies to front-mounted
controllers only.
21.Connect the thermostat (16) and refrigerant
valve harnesses (14) to the NEO adapter
harness. Mount the NEO 1 assembly to the
dashboard.
22. Bundle any unused connectors to the wiring
harness and rout the wiring harness down the
driver's side a-pillar (20, 22).
NOTE: Due to production differences, fuse
panels may not be identical to this image.
NOTE: Be sure to connect the to feed side of
the fuse.
23.Connect the pink wires from the NEO adapter
harness and the blower harness to the add-a-
circuit (40) and install in a position that has 12V
ignition power.
20
Ram ProMaster