Spare Tire Removal; Preparations For Jacking - Jeep 2010 Commander Owner's Manual

Hide thumbs Also See for 2010 Commander:
Table of Contents

Advertisement

Lowering/Raising Spare Tire

Spare Tire Removal

Fit the jack handle extension over the drive nut. Use the
lug wrench to rotate the nut counterclockwise until the
spare is on the ground with enough slack in the cable to
allow pulling the tire out from under the vehicle.
WHAT TO DO IN EMERGENCIES 345
CAUTION!
The winch mechanism is designed for use with the
jack extension tube only. Use of an air wrench or
other power tools is not recommended and can dam-
age the winch.
When the spare is clear, tilt the retainer at the end of the
cable and pull it through the center of the wheel.

Preparations For Jacking

1. Park the vehicle on a firm, level surface. Avoid ice and
slippery areas.
6

Advertisement

Table of Contents
loading

Table of Contents