Front Fog Lamp - Jeep 2010 Commander Owner's Manual

Hide thumbs Also See for 2010 Commander:

Table of Contents

1 — Low Beam Bulb

2 — High Beam Bulb

3 — Front Park/Turn Signal Bulb

4. Turn the socket on the bottom of the front lamp unit

housing 1/4 turn counterclockwise to unlock it.

MAINTAINING YOUR VEHICLE 403

5. Pull the socket and bulb straight out from the opening

in the housing.

6. Disconnect the electrical connector.

7. Pull the base of the bulb straight out of the socket.

Do not touch the new bulb with your fingers. Oil

contamination will severely shorten bulb life. If the

bulb comes in contact with any oily surface, clean the

bulb with rubbing alcohol.

Front Fog Lamp

1. Turn the steering wheel all the way to the left or right.

Table of Contents

Do you have a question about the 2010 Commander and is the answer not in the manual?