Battery Saver Feature - Exterior/Interior Lights; Lights-On Reminder; Turn Signals - Jeep 2010 Commander Owner's Manual

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Battery Saver Feature — Exterior/Interior Lights
If the multifunction lever is left in the interior light
position, parking light position, or the headlight position
when the ignition switch is moved to the OFF position,
the battery saver feature will automatically turn off the
exterior and interior lights after eight minutes. Normal
operation will resume when the ignition is turned ON or
when the headlight switch is turned to another position.

Lights-On Reminder

If the headlights or parking lights are on after the ignition
is turned OFF, a chime will sound when the driver's door
is opened.

Turn Signals

Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.
Turn Signal Control
NOTE: If either light remains on and does not flash, or
there is a very fast flash rate, check for a defective outside
light bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.