Bulb Replacement; Head Lamp - Jeep 2010 Commander Owner's Manual

Hide thumbs Also See for 2010 Commander:

Table of Contents

NOTE: Numbers refer to commercial bulb types that

can be purchased from your authorized dealer.

If a bulb needs to be replaced, visit your authorized

dealer or refer to the applicable Service Manual.

BULB REPLACEMENT

1. Open the hood.

2. Disconnect the electrical connector.

3. Turn the low or high beam bulb 1/4 turn counterclock-

wise to unlock it from the housing.

MAINTAINING YOUR VEHICLE 401

1 — Low Beam Bulb

2 — High Beam Bulb

3 — Front Park/Turn Signal Bulb

4. Pull the bulb and base straight out from the opening in

the reflector.

Table of Contents

Do you have a question about the 2010 Commander and is the answer not in the manual?