Windshield Wiper Operation; Windshield Washer Operation - Jeep 2010 Commander Owner's Manual

Windshield Wiper Operation

Rotate the end of the lever upward to the LO position for
low-speed wiper operation.
Rotate the end of the lever upward to the HI position for
high-speed wiper operation.
Front Wiper Control
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113
CAUTION!
Always remove any buildup of snow that prevents
the windshield wiper blades from returning to the
"park" position. If the windshield wiper switch is
turned off, and the blades cannot return to the "park"
position, damage to the wiper motor may occur.

Windshield Washer Operation

To use the washer, pull the lever toward you and hold
while spray is desired. If the lever is pulled while in the
delay range, the wiper will operate for several seconds
after the lever is released, and then resume the intermit-
tent interval previously selected.
If the lever is pulled while in the off position, the wipers
will operate for several wipe cycles, then turn off.
3