Connecting To Ac Power; Backup Battery - iHome iBTW23 Manual

C O N N E C T I N G T O A C P O W E R
This unit operates on AC power
using the included 100V-240V
universal AC adaptor.
Place unit on a stable surface. Plug
the power adaptor into the DC jack
on back of the unit and the other
end into a working wall socket. You
can now charge your iPhone or
iPod.
B A C K U P
The iBTW23 ships with a CR2450 battery installed for backup to provide
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
alarm time settings will be temporarily maintained. Otherwise, you must reset
the time and alarm settings.
Note: The Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps on the next page.
B A T T E R Y
T R E S E T E S E R
T T E S T S E T
3