Software; Minimum Computer Requirements; Installation - AEMC instruments Simple Logger AmpFlex AL24-2500 User Manual

®
Simple Logger AmpFlex™ Current Probes

SOFTWARE

This model requires software version 6.11 or higher.

MINIMUM COMPUTER REQUIREMENTS

Processor: 486 or higher
RAM Storage: 8MB
Hard Drive Space: 8MB for application, approx. 400K for each stored file
®
Environment: Windows 98, 2000, ME, NT and XP
Port Access: (1) 9-pin serial port and (1) parallel port for printer support

INSTALLATION

®
Your Simple Logger software is supplied on a CD-ROM. To install the
program, perform the following steps:
®
Auto Run Disabled: If Auto Run is disabled, insert the Simple Logger
CD into the CD-ROM drive, then select Run from the Start Menu. In the
dialog box that appears, type: D:\setup, then click the OK button.
NOTE: In this example, your CD-ROM drive is assumed to be drive letter
D. If this is not the case, substitute the appropriate drive letter.
®
Auto Run Enabled: If Auto Run is enabled, insert the Simple Logger
CD into the CD-ROM drive and follow the on-screen prompts to
complete the setup.
• Select Simple Logger 6.11
• Select Acrobat Reader to install Acrobat Reader version 5.0
®
• Select Explore CD to view the User Guide, Simple Logger
Catalog or
user specific manuals in PDF format.
To view the documents included on the CD-ROM, you must have
Acrobat Reader installed on your machine. If you do not have it installed,
®
you can install it from the Simple Logger Software CD-ROM.
Installing Acrobat Reader: Select Run from the Start Menu. In the
dialog box that appears, type: D:\Acrobat\setup, then click OK.
NOTE: In this example, your CD-ROM drive is assumed to be drive letter
D. If this is not the case, substitute the appropriate drive letter.
8