Vivotek SUPREME SD9362-EH-v2 User Manual page 42

Speed dome network camera

Hide thumbs Also See for SUPREME SD9362-EH-v2:

Table of Contents

Joystick Settings

Enable Joystick

Connect to the USB plug of the joystick to a USB port on your management computer. Once a USB

joystick is connected, the related joystick configuration will be available on the Client settings window.

The joystick should work properly without installing any other driver or software.

Then you can begin to configure the joystick settings of connected devices. Please follow the instructions

below to enable joystick settings.

1. Click on the Configure buttons button. If your joystick is working properly, it will be displayed on the

drop-down list.

42 - User's Manual