Vivotek SUPREME SD9362-EH-v2 User Manual page 166

VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
Version Issue date
V1.9e 2016/10/14
V2.0a 2016/10/28
V2.1a 2016/12/07
166 - User's Manual
Editor Comment
4. Remove washerctrl.cgi
5. Add peripheral cgi
6. Remove camclean group
Sarah 1. Add these parameters:
capability_image_c<0~(n-1)>_focuswindow_nwindow,
capability_image_c<0~(n-1)>_focuswindow_range,
2. Modify the description of focuswindow group
Sarah 1. Modify the description of these parameters:
capability_image_c<0~(n-1)>_focuswindow_range,
2. Modify the the security level of these parameters:
network_pppoe_pass,
network_ieee8021x_password,
network_ieee8021x_privatekeypassword,
ddns_<provider>_passwordkey,
server_i<0~4>_http_passwd,
server_i<0~4>_ftp_passwd,
server_i<0~4>_email_passwd,
server_i<0~4>_ns_passwd,
snmp_authpwrw,
snmp_authpwro,
snmp_encryptpwrw,
snmp_encryptpwro,
security_use_i0_pass,
3. Add these parameters:
network_ftp_enable,
event_i<0~2>_action_cutsom<0~2>_enable,
event_i<0~2>_action_cutsom<0~2>_name,
4. Modify the cgi descriptions of camea control/preset
locations/recall/3D privacy mask/fisheye local dewarp camera
control/IP filtering for ONVIF/ virtual input/IP filtering/ePTZ
preset locations/ePTZ recall/ePTZ camera control/account
management in chapter 8
Sarah 1. Add these parameters:
capability_audio_aecswitch,
audioin_c0_aec_enable,
2. Modify the description of these parameters:
event_i<0~2>_action_goto_sync,
13