Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
PARAMETER VALUE
position
<motor_start> ~
<motor_end>
steps
1 ~ 30
iris
N/A
Syntax:
(for query API)
http://<servername>/cgi-bin/admin/remotefocus.cgi?channel=<value>&[function=<value>]
DESCRIPTION
Motor's position.
It works only if function=zoom or function= focus and
direction=direct.
<motor_start> : remote_focus_zoom_motor_start or
remote_focus_focus_motor_start,
<motor_end> : remote_focus_zoom_motor_end or
remote_focus_focus_motor_end replied from
"function=getstatus"
Motor's moving steps.
It works only if function=zoom or function=focus and
direction=forward and direction=backward.
* Motor will stop when it reaches to <motor_start> or
<motor_end>.
* This parameter is for additional fine-tune, the value is
from 1 to 30.
Open iris or not.
It works only if function=auto or function=scan.
VIVOTEK
266
User's Manual - 419
Advertisement
Table of Contents
