Vivotek SUPREME SD9362-EH-v2 User Manual page 164

VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
Version Issue date
V1.8c 2016/05/10
V1.8d 2016/06/04
164 - User's Manual
Editor Comment
2. Add smartsd value type to capability_supporttriggertype
parameter
3. Add these parameters:
ircutcontrol_extledmode,
camctrl_c<0~(n-1)>_focusmode,
capability_image_c<0~(n-1)>_exposure_hlcmode_affect,
capability_daynight_c<0~(n-1)>_extled_interface,
capability_camctrl_c<0~(n-1)>_focusmode,
capability_videoin_c<0~(n-1)>_rotationaffect,
capability_videoin_c<0~(n-1)>_minresolution,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_eptz,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_wdrpro,
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_minresolution
4. Add camera PTZ control group for IZ series
5. Modify the descriptions of these parameters:
action_goto_sync,
action_autotrack_enable,
capability_image_c<0~(n-1)>_wdrpro_affect,
capability_image_c<0~(n-1)>_wdrc_affect,
videoin_c<0~(n-1)>_aespeedsupportsensitivity,
videoin_c<0~(n-1)>_profile_i0_aespeedsupportsensitivity
Kelly 1. Modify the value range description of these parameters:
videoin_c<0~(n-1)>_s<0~(m-1)>_resolution,
videoin_c<0~(n-1)>_s<0~(m-1)>_mjpeg_qvalue,
ircutcontrol_extledmode
2. Modify the description of roi_c<0~(n-1)> group
3. Modify the description of eptz_c<0~(n-1)>_s<0~(m-1)> group
4. Modify the value of camctrl_c<0~(n-1)>_cameraid
5. Modify the camctrl cgi for querying API.
Kelly 1. Add these parameters:
capability_image_c<0~(n-1)>_exposure_hlcmode_supportwind
ow
2. Add getmaxratio/getmaxdratio parameters in the camctrl cgi
for querying API.
3. Modify the description of these parameters:
image_c<0~(n-1)>_gammacurve
image_c<0~(n-1)>_profile_i0_gammacurve
11