Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
PARAMETER
autocleanup_mode
autocleanup_enabled
<Not recommended to
use this>
autocleanup_maxage
<Not recommended to
use this>
VALUE
SECURITY
(get/set)
targetbase,
6/6
sourcebase
<boolean>
6/6
<positive integer> 6/6
DESCRIPTION
Specify the automatic clean up method
for storage devices, where "targetbase"
indicate the automatic clean up is based
on the attached devices such as nas or sd
card, whereas "sourcebase" indicate
automatic clean up is based on the
selected recording track.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
Enable automatic clean up method.
Expired and not locked media files will be
deleted.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
To specify the expired days for automatic
clean up.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
VIVOTEK
218
User's Manual - 371
Advertisement
Table of Contents
