Vivotek SUPREME SD9362-EH-v2 User Manual page 251

© 2020 VIVOTEK INC. All Right Reserved
7.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME VALUE
brightness -5~5,100
<Not
recommended to
use this>
contrast -5~5,100
<Not
recommended to
use this>
saturation -5~5,100
<Not
recommended to
use this>
_spectrum_mode"
.
SECURITY
(get/set)
4/4
4/4
4/4
DESCRIPTION
-5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
-5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.
* We replace "contrast" with
"contrastpercent ".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
-5: Less saturation <-> 5: More
saturation
100: Use "
image_c<n>_saturationpercent"
* Only available when bit 2 of
"capability_image_c<0~(n-1)>_basicse
VIVOTEK
98
User's Manual - 251