Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
Version Issue date
V2.1b
2017/01/04
V2.1c
2017/01/18
V2.2a
2017/02/07
V2.2b
2017/03/16
Editor
Comment
Sarah
1. Modify the description of these parameters:
audioin_c0_aec_enable,
capability_image_c<0~(n-1)>_exposure_hlcmode_supportwind
ow,
capability_image_c<0~(n-1)>_exposure_hlcmode_affect,
event_i<0~2>_action_goto_sync,
ircutcontrol_bwmode
2. Remove these parameters:
event_i<0~2>_action_cutsom<0~2>_enable,
event_i<0~2>_action_cutsom<0~2>_name,
3. Rename aec parameter:
capability_audio_aecswitch -> capability_audio_aecmode
4. Add these parameters:
capability_audio_aecaffect
Kelly
1. Fix typo: aecaffect -> audio_aecaffect
Kelly
1. Modify the description of these parameters:
capability_videoout_codec,
event_i<0~2>_di,
capability_ptzenabled
2. Add these parameters:
capability_image_c<0~(n-1)>_dnrstrength,
capability_shockalarm_support,
capability_presettourdirection,
capability_daynight_c<0~(n-1)>_optimizedir,
camctrl_c0_tour_i<0~19>_direction
Kelly
1. Remove the unused baudrate: 110,3600,7200 in uart group.
2. Modify the description of these parameters:
capability_image_c<0~(n-1)>_exposure_hlcmode_affect
3. Remove these parameters:
capability_peripheral_c<0~(n-1)>_washer_support,
capability_peripheral_c<0~(n-1)>_washer_mode,
capability_peripheral_c<0~(n-1)>_heater_support
4. Add these parameters for IZ camera:
camctrl_c<0~(n-1)>_returnhome,
camctrl_c<0~(n-1)>_returnhomeinterval,
camctrl_c<0~(n-1)>_idleaction_enable,
camctrl_c<0~(n-1)>_idleaction_type,
VIVOTEK
14
User's Manual - 167
Advertisement
Table of Contents
