Vivotek SUPREME SD9362-EH-v2 User Manual page 244

VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
<Not
recommended to
use this>
sir
<product
dependent>
<Not
recommended to
use this>
daymodebegintime
<Not
recommended to
use this>
daymodeendtime
<Not
recommended to
244 - User's Manual
VALUE
day,
night,
di,
schedule...etc
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_mode"
<product dependent>
<boolean>
00:00~23:59
00:00~23:59
SECURITY DESCRIPTION
(get/set)
* We replace this parameter with
"ircutcontrol_c0_mode" when the
version number (httpversion) is equal
or greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
6/6 Enable/disable Smart IR* Only
available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_smartir" is 1
* We replace this parameter with
"ircutcontrol_c<0~(n-1)>_sir" when
the version number (httpversion) is
equal or greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
6/6 Day mode begin time
* We replace this parameter with
"ircutcontrol_c<0~(n-1)>_daymodebe
gintime" when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
6/6 Day mod end time
* We replace this parameter with
"ircutcontrol_c<0~(n-1)>_daymodeen
91