Vivotek SUPREME SD9362-EH-v2 User Manual page 247

© 2020 VIVOTEK INC. All Right Reserved
NAME VALUE
spectrum_mode visible,
<Not ir,
recommended to irenhanced,
use this> blueenhanced
<product dependent>
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_spectrum
_mode".
7.10.1 IR cut control setting per channel
Group: ircutcontrol_c<0~(n-1)> for n channel products
0)
n denotes the value of "capability_nvideoin"
NAME
SECURITY
(get/set)
6/6
VALUE SECURIT
Y
DESCRIPTION
ensitivity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
* We replace this parameter with
ircutcontrol_c<0~(n-1)>_sensitivity"
when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
Set spectrum method .
* Only available when
"capability_daynight_c<0~(n-1)>_spec
trum_support" is 1.
* We replace this parameter with
"ircutcontrol_illuminators_spectrum_
mode" when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
(capability_daynight_c<0~(n-1)>_support >
DESCRIPTION
VIVOTEK
94
User's Manual - 247