© 2020 VIVOTEK INC. All Right Reserved
Version Issue date
V1.9a
2016/07/06
V1.9b
2016/08/03
V1.9c
2016/08/24
V1.9d
2016/09/09
Editor
Comment
4. Modify the value range description of image_c0_restoreatwb
Kelly
1. Add these parameters:
capability_image_c<0~(n-1)>_aespeedsupportsensitivity
2. Add wireless group
3. Add wireless cgi
(connect_ap.cgi/getwirelessinfo.cgi/getwlsignalstrength.cgi/sta
rt_wps.cgi) in chapter 8.
4. Add these parameters:
capability_newtwork_dualmode,
capability_wireless_apmode_enable,
capability_wireless_apmode_ssidprefix,
capability_image_c<0~(n-1)>_exposure_qualityprioritymode_af
fect
5. Modify the description of these parameters:
videoin_c<0~(n-1)>_exposuremode,
videoin_c<0~(n-1)>_profile_i<0~(m-1)>_exposuremode
6. Remove these parameters:
capability_peripheral_c<0~(n-1)>_watersprary_support,
capability_peripheral_c<0~(n-1)>_wiper_support
7. Add camclean group and cgi (washerctrl.cgi)
Sarah
1. Modify the description of ircutcontrol group
Sarah
1. Add these parameters:
capability_ peripheral_c<0~(n-1)>_shockdetection_support
camctrl_preset_i<0~(capability_npreset -1)>_focussetting
2. Add shock group
3. Add the focus setting cgi in camctrl group
4. Modify the camctrl cgi for set the ptz preset with focus mode
Sarah
1. Add these parameters:
capability_peripheral_c<0~(n-1)>_devicecontrol,
capability_peripheral_c<0~(n-1)>_heater_support,
2. Remove these parameters:
capability_thermal_support,
capability_thermal_controlmode,
capability_thermal_temperaturedetection,
capability_peripheral_c<0~(n-1)>_shockdetection_support,
3. Modify the description of these parameters:
capability_peripheral_c<0~(n-1)>_washer_support
VIVOTEK
12
User's Manual - 165