Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
NAME
to use this>
width
<Not recommended
to use this>
height
<Not recommended
to use this>
7.17 Tampering Detection Settings
Group: tampering_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
NAME
enable
VALUE
SECURITY
(get/set)
0 ~ 320
4/4
0 ~ 240
4/4
VALUE
SECURITY
(get/set)
<boolean>
4/4
DESCRIPTION
"capability_motion_wintype" =
rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
Width of motion detection window.
* Only available when
"capability_motion_wintype" =
rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
Height of motion detection window.
* Only available when
"capability_motion_wintype" =
rectangle.
* Only available when qvga is listed in
"capability_motion_windomain".
* It's recommended to use polygonsd
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
(capability_tampering > 0)
DESCRIPTION
Enable or disable tamper detection.
VIVOTEK
122
User's Manual - 275
Advertisement
Table of Contents
