Technical Specification; Power Supply; Control Pcb; Mechanical - Pyronix BUMBT!8 Installation Instructions Manual

13

TECHNICAL SPECIFICATION

13.1

Power supply

Power input
Low voltage output
Low voltage output fuses
Battery charge voltage
Rechargeable battery capacity
13.2

Control PCB

Current consumption
(day mode)
(set mode)
(alarm)
Auxiliary DC output supply
Extension Speaker load
Bell
Strobe
PR1 / PR2
Alarm bell time
Zone type
Zone loop current
Zone activation resistance
Zone loop activation timer
Exit timer
Entry timer
13.3

Mechanical

Dimensions
Case material
Colour
Weight excluding battery
13.4

Environmental

Operating temperature
Storage temperature
13.5

Cleaning

DO NOT use strong detergents to clean this control panel. To remove any dirt or grime, wipe with a clean damp cloth
ONLY
Page 28
: 17V a.c.
: 13.2 Vdc fused, 1.25 Amp maximum Including Control Panel.
1Amp maximum available for external devices.
: 1 Amp quick blow.
: 13.7 V d.c.
: 12V sealed lead acid, 2.8 to 6 AH.
: 130mA.
: 130mA.
: 130mA.
: Regulated 13.2V d.c. for use with PIR, microwave and shock sensors.
: 16 to 32 Ohms.
: 500mA.
: 500mA.
: 250mA.
: 2 to 20 minutes (software programmable).
: Normally closed loops which activate when opened or short circuit.
: 0.76 to 1.03mA.
: 6.9K Ohms (minimum).
: 0.35 seconds.
: 2 to 255 seconds.
: 2 to 255 seconds.
: 228 x 243 x 75 mm.
: 1.2mm (0.8mm export) thick Mild steel with screw fixing front cover.
: White (grey export).
: 2.6Kg.
: 0 to +40 0 C (+32 to +104
: -20 to +60 0 C (-4 to +172
0 F).
0 F).