Zone Tamper Alarm Report Codes; System Set / Unset Reporting Codes; User Set Reporting Codes - Pyronix BUMBT!8 Installation Instructions Manual

11.11.13 Zone Tamper reporting Codes
Enter Enter 2 digits for each tamper zone. To disable an event insert blanks for both digits.
To use HEX codes, use the

11.11.14 System Set / Unset Reporting Codes

Enter Enter 2 digits for seven reporting codes. To disable an event insert blanks for both digits.
To use HEX codes, use the

11.11.15 User set reporting codes

Enter Enter 2 digits for seven reporting codes. To disable an event insert blanks for both digits.
To use HEX codes, use the
Page 24
key to select the character required and the
Example
Tamper zone 1
Tamper zone 2
Tamper zone 3
Tamper zone 4
Tamper zone 5
Tamper zone 6
Tamper zone 7
Tamper zone 8
key to select the character required and the
Example
Set A
Set B
Set C
Set C
Duress Set
Duress Unset
Confirmed Alarm Code
key to select the character required and the
Example
Set User 1
Set User 2
Set User 3
Set User 4
Set User 5
Set User 6
Set User 7/Keyswitch
key to accept.
key to accept.
key to accept.