Table of Contents
Advertisement
12
SYSTEM FAULTS
There are 6 fault conditions automatically detected by the Atlas 8. The user is informed of a fault via the fault LED. This
LED will illuminate and an error tone will be emitted every 5 seconds when the panel is in day mode, Press a function key
to stop the error tone. The fault LED will remain on until the fault has been corrected.
To determine the fault go into the log by entering
1
Bell Fuse Failure
2
Auxiliary Fuse Failure
3
Battery Missing
4
Low Battery Voltage
5
Mains Failure
6
Telephone Line Failure
8
Failure to communicate
Rins 181 Issue7
. A
symbol followed by 1 - 6 will be displayed.
Page 27
Advertisement
Table of Contents
Need help?
Do you have a question about the BUMBT!8 and is the answer not in the manual?
Questions and answers