System Option - Pyronix BUMBT!8 Installation Instructions Manual

11.11.3 System Option 1

Enter followed by
Key Function
1 Alarm
2 Tamper
3 P.A.
4 Fire
11.11.4 System Option 2
Enter followed by
Key Function
1 Alarm
2 Tamper
3 P.A
4 Fire
11.11.5 System Option 3
Enter followed by
Key Function
1 Alarm
2 Tamper
3 P.A.
4 Fire
11.11.6 System Option 4
Enter followed by
Key Function
1 Alarm
2 Tamper
3 P.A.
4 Fire
Page 22
- . The RKP LEDs will toggle on and off indicating the selection made.
LED ON
Double pole zones
User log reset enable
Pulse dial
External & internal sounders on
tamper activation
- to toggle RKP LEDs
LED ON
7 Day test dial
Dial-in
Wide handshake filters
Silent P.A. zones
- to toggle RKP LEDs
LED ON
Engineer only NVM reset
Display open zones in day mode
Alarm in line fail
Disable telephone line monitoring
- to toggle RKP LEDs
LED ON
Bell squawk
Bell time seconds
No AC fail warning
Spare
LED OFF
End of line zones
User log reset disable
Tone dial
Internal sounder only on tamper
activation
LED OFF
24 hour test dial
No dial-in
Standard handshake filters
Audible P.A. zones
LED OFF
User NVM reset
No display
No alarm in line fail
Enable telephone line monitoring
LED OFF
No bell squawk
Bell time minuets
AC fail warning
Spare