Safety Instructions - Leica F12 I User Manual

Safety Instructions

Intended use
Refer to the "Safety Concept" brochure.
Ϙ
Non-intended use
Refer to the "Safety Concept" brochure.
Ϙ
The instruments and accessories described
in this manual have been safety-tested and
checked for possible hazards. The responsible
Leica affiliate must be consulted whenever
the instrument is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this manual.
Leica F12 I Floor Stand
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Installation location
Refer to the "Safety Concept" brochure.
Ϙ
Electrical components must be placed at
Ϙ
least 10 cm away from the wall and from
flammable substances.
Avoid large temperature fluctuations, direct
Ϙ
sunlight and vibrations. These conditions
can distort measurements and microgra-
phic images.
In warm and warm-damp climatic zones,
Ϙ
the individual components require special
care in order to prevent the build-up of
fungus.
Manual
Requirements to be met by the operator:
Refer to the "Safety Concept" brochure.
Ϙ
Ensure that:
The Leica F12 I is operated, maintained and
Ϙ
repaired only by authorized and trained
personnel.
All operators have read, understood and
Ϙ
observe this User Manual, and particularly
the safety regulations.
6