Goods Inward Check/Delivery Inspection; Safety Directions In These Assembly Instructions - Leica M500 OH3 Service Manual

Goods inward check/delivery inspection

Damaged goods reduce the safety level.
The use of damaged products can cause severe injury.
Check the packaging and goods for transport damage:
• The transport container should be undamaged.
• The delivery as listed in the order folder should be complete.
• The optional accessories as listed in the order folder should
be complete.
• The user manual should be present.
If damage has occurred, have the safety of the goods inspected
by the Leica service workshop before using them.
Safety directions in these assembly
instructions
Caution
Damage to microscope if the screws are tightened too
excessively!
➩Avoid the use of excessive force when tightening all
screws.
➩Set the torque wrench to the torque specified. Apply
the wrench until this torque is reached (signalled by a
clicking noise). Do not tighten further.
Warning
Risk of severe personal injury when the stand moves in
an uncontrolled manner!
➩Lock the foot brakes during the mounting process.
Caution
Risk of injury through falling wheel counterweight!
➩During the change, ensure that your feet are not under
the wheel counterweight.
Caution
Risk of injury by falling wheel counterweight or cover!
➩During the change, ensure that your feet are not under
the wheel counterweight or the cover.
Warning
Risk of injury by movements of the microscope during
balancing out!
➩Do not remain in the immediate vicinity of the
microscope during balancing out.
Caution
Damage to the microscope if cables get caught!
➩Make sure that cables do not get caught between the
microscope carrier and the cover and the microscope
carrier.
Leica M500 OH3 / Ref. 10 711 895 / Version -
General safety measures
5