Safety Instructions - Leica Emspira 3 User Manual

Safety Instructions

Description
The individual modules fulfill the highest
O
requirements for observation and docu-
mentation with the Emspira 3 system.
Intended Use
Refer to "Safety Concept" booklet
O
Non-intended use
Refer to "Safety Concept" booklet
O
Never use Emspira 3 or its components for
surgical procedures (such as eye surgery) since
it is not intended for such use.
The digital microscope and accessories descri-
bed in this user manual have been tested for
safety and potential hazards. The responsible
Leica affiliate must be consulted whene-
ver Emspira 3 is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this user manual!
Emspira 3 User Manual
Unauthorized alterations to Emspira 3 or
noncompliant use shall void all rights to any
warranty claims.
Place of use
Refer to "Safety Concept" booklet
O
Electrical components must be placed at
O
least 10 cm away from the wall and from
flammable substances.
Avoid large temperature fluctuations, direct
O
sunlight and vibrations. These conditions
can distort measurements * and microgra-
phic images.
In warm and warm-damp climatic zones,
O
the individual components require special
care in order to prevent the build-up of
fungus.
* Measurement results and accuracy depend
on used objective, zoom and microscope
settings.
General Notes
Responsibilities of person in charge of
Emspira 3
Refer to "Safety Concept" booklet
O
Ensure that:
The Emspira 3 system and accessories are
O
operated, maintained and repaired by
authorized and trained personnel only.
All operators have read, understood and
O
observe this user manual, and particularly
the safety regulations.
8