Table of Contents
Advertisement
Running the INSTALL Program
The INSTALL program is use to check the system for
possible conflicts, to set monitor type, to install enhanced display
drivers and utilities, to run card diagnostics, and to customize
hardware parameters for manning performance.
Card configuration is based on multiple choices from
screen menus. where possible, your selections will be
automatically checked by the program for compatibility, thus
ensuring conflict-free operation. checking is staring by selecting
SYSTEM INFORMATION in this Main Menu.
Procedure
If this is your first time installation, select Setup a). We
·
recommend that you install the install the utilities onto your hard
drive and follow Setup B). on subsequent INSTALL sessions:
a)
Floppy Drive - Insert Disk#1 into driver A, then type:
b)
Hard Driver - Change to the directory containing the
mach64
MACH64, type:
Starting the installation program by typing:
·
µ §
Note:
Driver installation and card setup function are proved in the Main
Menu. This menu is the staring point for installing mach64
enhance driver and utilities and for accessing configuration and
A:<Enter> (substitute B: for A: if using drive B:)
README<Enter>
A:<Enter> (For driver B, substitute B: for A:)
CD\<Enter>
C:<Enter>
CD\MACH64<Enter>
INSTALL<Enter>
utilities. if the directory is C:\
Advertisement
Table of Contents
