µ §
Case Connector Block: JFP
The Turbo LED, Turbo Switch, Hardware Reset, Keylock, Power
LED, Sleep Switch, Speaker and HDD LED all connect to the JF
Connector Block as shown below. See figure 1-1 for JF's
µ §
location.
Figure 2-4: Case Connector Block - JF.
Power Supply Connector: J 1
The power supply connector is a twelve-pin male connector. Dual
connectors from the power supply can fit in only one direction.
Make sure to attach the connectors with the two black wires at the
center, as show in the diagram below. See Figure 1-1 for the
connector's location.
Figure 2-5: Attaching Power Supply Connectors.