Table of Contents
Advertisement
3. WINBOND W24M1024AK-15(128K8 mixed
Tag RAM used below:
1. WINBOND W24128AK-15 (16K8)
2. WINBOND W24129AK-15 (16K8)
3. Aster AE88128AK-15 (16K8)
4. WINBOND W24257AK-15 (32K8)
5. WINBOND W24M257AK-15 (32K8)
Memory Bank Configuration
The system board supports four memory banks and provides four
72-PIN, single in-line on-board memory module (SIMM) sockets,
numbered SIMM1 ¾ SIMM4.
Each socket accepts single density or double density (D)SIMM in
the following sizes: 4M(S), 8M(D), 8M(S), 16M(S), 32M(D),
64M(S), and 128M(D).
You can use one piece of 72 PIN SIMM (32 bits DRAM) in
SIMM1 or SIMM3.
The maximum memory configuration is: 512M=SIMM1/2 (128M
x 2) + SIMM3/4(128Mx2)
µ §
mode)
You must install two of the same type of EDO or FP in
the SIMM sockets SIMM1/SIMM2 or SIMM3/SIMM4
when you mix the EDO and fast page DRAM. For
example:
SIMM1
Chapter 2 ¾ Installation
SIMM2
SIMM3
SIMM4
Advertisement
Table of Contents
