(secondary). You can connect up to four hard disk drivers to
HDD1 and HDD2.
VGA Connector: VGA
The system board has a VGA Controller - ATI mach64 graphics
accelerator that supports a VGA port with PCI bus interface. Plug
a VGA monitor into this connector.
On-Board VGA Selection: JVG1
On-Board VGA
Enable
Disable
Disable JVG1 if you want to install an external VGA adapter card.
VGA Feature Connector: CN1
CN1 is a standard 26-pin VGA Feature connector. You can attach
peripherals that specify this type of connector to CN1.
VGA DRAM Configuration
Install VGA DRAM memory as below.
Chapter 2 ¾ Installation
JVG1
1-2
2-3