Turning Power On/Off; Turning On The Main Power; Turning Power On; Turning Power Off - Sharp PN-80TH5 Operation Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.

Turning power on

Press the POWER button or MONITOR ON button to turn the
power ON.
Power LED
Status
Blue lit
Orange lit
Blue flashing
TIPS
• You can fix the input mode that appears after startup. Set
START INPUT MODE on the SETUP menu.

Turning Power On/Off

POWER button
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode

Turning power off

Turning power off with monitor buttons
1. Touch the POWER button.
The recognition screen appears.
2. Touch [OK].
The power is turned off. (Standby mode)
TIPS
• If about 15 seconds elapses while the recognition screen
appears, the power will automatically turn off.
Turning power off with remote control unit
1. Press the POWER button or MONITOR OFF button.
The power is turned off. (Standby mode)
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in input signal waiting mode and you press
the POWER button, the monitor enters standby mode.
• Setting the SCHEDULE flashes the power LED in orange
in standby mode.
• To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the OTHERS
menu. (See page 38.)
POWER button
17
E