Sharp PN-80TH5 Operation Manual page 40

Menu Items
TIPS
• You might infringe on a copyright of the author which is
protected by copyright law when you display the images of
the computer screen and television/VCR simultaneously for
profit-making or to show the image to the public.
• When quad-screen display is selected, screen size cannot
be changed.
The screen size for quad-screen display is the same as
the screen size for single-screen display. The Dot by Dot
screen is displayed in NORMAL size.
• When quad-screen display is selected, the CONNECT
AUTO INPUT SELECT function and NO SIGNAL AUTO
INPUT SEL. function are disabled.
• When quad-screen display is selected, D-SUB of INPUT
SELECT cannot be set.
• When quad-screen display is selected, SCREEN menu and
AUDIO menu cannot be set.
• When quad-screen display is selected, the DISPLAY
COLOR PATTERN cannot be set.
• When the screen size is set to ZOOM2 and ZOOM2
SPECIAL SETTING is set to ON, that display state is held.
• When quad-screen display is selected, DisplayPort2 of
DisplayPort STREAM cannot be set.
• When quad-screen display is selected, the monitor will
not enter the input signal waiting mode even if POWER
MANAGEMENT is set to ON.
• When quad-screen display is selected, HDMI CEC LINK
does not operate.
• When quad-screen display is selected, the FREEZE, DP
(DisplayPort), HDMI, and OPTION buttons cannot be used.
• When quad-screen display is selected, the position 1
screen is output from the DisplayPort output terminal.
• When quad-screen display is selected, the connected
computer cannot be operated by touch.
nZOOM2 SPECIAL SETTING
If you connect a laptop computer with any of the following
screen resolutions and black bands appear around the screen,
set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the
SCREEN menu to ON and then select ZOOM2 in the SIZE
setting.
This displays the area inside the black band.
Laptop computer
resolution
1280x800
1280x600
1024x600
*1: This setting is effective only when the screen resolution,
including the black band, is one of the resolutions listed
above.
*2: Use the automatic screen adjustment.
40
E
1
Corresponding signal*
1280x1024, 1280x960, 1400x1050*
1280x720
1024x768
nSCHEDULE
You can set the time to switch the monitor on and off.
Set this function with "SCHEDULE" in the SETUP menu. (See
page 34.)
SCHEDULE
– –/– –/– – – –
(2)
(1)
No. POWER DAY OF THE WEEK
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
1. Press the or
number, and press the
2. Set the SCHEDULE. (See the description below.)
Press the or button to select items, and press the
button to change the setting.
3. Press the ENTER button.
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-: SCHEDULE not effective
(2) POWER
ON : Switches the monitor on at the specified time.
OFF : Switches the monitor off at the specified time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Specifies the day of the week to execute the SCHEDULE.
0:ONLY ONCE
Executes the SCHEDULE once on the specified day.
Specify the day of the week to execute the SCHEDULE.
1:EVERY WEEK
Executes the SCHEDULE on the specified day of the week
every week. Specify the day of the week to execute the
2
SCHEDULE.
Periodic setting such as "Monday through Friday" is also
possible.
2:EVERY DAY
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis. (Factory default)
Can be entered as 12-hour time using the TIME setting in
DATE/TIME FORMAT.
(5) INPUT
Specifies the input mode at power-on. If not specified, the
START INPUT MODE setting will apply. By factory default,
the input that was active when the power was last turned off
will appear.
Input modes displayed on D-SUB will depend upon the
INPUT SELECT settings.
D-SUB[RGB]
– – – – –:– –:– –
(3) (4) (5)
TIME INPUT
– – – – – – – –
-
:
– – – – – – – –
-
:
– – – – – – – –
- :
– – – – – – – –
- :
– – – – – – – –
-
:
– – – – – – – –
-
:
– – – – – – – –
- :
– – – – – – – –
- :
OK:[ENTER] CANCEL:[RETURN]
button to select the SCHEDULE
button.
(6)
BRIGHT
– –
– –
– –
– –
– –
– –
– –
– –
or