Sharp PN-80TH5 Operation Manual page 37

nMULTI/PIP
PIP/PbyP
PIP MODES
Sets the display method.
OFF ........... Displays one screen.
PIP ............ Displays a sub screen inside a main screen.
PbyP .......... Displays a main screen and a sub screen in a line.
PbyP2........ Displays a main screen which measures 2560 pixels in the longest direction and a sub screen in a line.
PIP SIZE
Sets the size of the sub screen in PIP mode.
PIP H-POS
Adjusts the horizontal position of the sub screen in PIP mode.
PIP V-POS
Adjusts the vertical position of the sub screen in PIP mode.
PIP BLEND
In PIP mode, use this menu item to display the sub screen transparently.
PIP SOURCE
Selects the input signal of the sub screen in PIP, PbyP or PbyP2 mode.
SOUND CHANGE
Sets the sound which is output in PIP, PbyP or PbyP2 mode.
MAIN POS
Sets the position of the main screen in PbyP or PbyP2 mode.
PbyP2 POS
Sets the position of the sub screen in PbyP2 mode.
CONFIGURE QUAD-SCREEN
QUAD-SCREEN MODE
Set how the screens are displayed.
OFF ........... Display single screen.
ON ............. Display 4 screens simultaneously.
SETTING INITIAL SCREEN
Set the input mode displayed in each of the 4 screens.
When AUTO is selected, input modes that have input signals are displayed in the order set in PRIORITY: AUTO INPUT SEL..
PRIORITY: AUTO INPUT SEL.
Set the order of priority for the input mode that is displayed when AUTO is selected for SETTING INITIAL SCREEN.
The lower the number, the higher the priority.
SAVE LAST INPUT CONFIG.
OFF ........... When quad-screen display is started, the 4 screens set in SETTING INITIAL SCREEN always appear.
ON ............. When quad-screen display is started, the previously displayed 4 screens appear.
TARGET: SOUND / INPUT SEL.
When quad-screen is displayed, you set the screen whose audio is output, and the screen whose input is changed.
When you return to single screen display, the input mode will return to the input mode set here.
RECONFIGURE QUAD-SCREEN
Displays 4 screens again according to SETTING INITIAL SCREEN setting.
This can be set when QUAD-SCREEN MODE is set to ON.
INPUT SIGNAL INFO.
This shows the input mode, resolution, and frequency of the displayed screens.
Menu Items
37
E